Non-Foaming Algicide 60%

Product Information

  • 60% polyquat
  • Non-foaming algae preventative
  • Suitable for use in swimming pools with attached spas or other water features

APPLICATION INSTRUCTIONS:

  1. Ensure all equipment is working properly. Clean or backwash the filter following manufacturer’s directions.
  2. Adjust pH to between 7.2-7.6. In chlorinated systems, add stabilizer to establish a minimum stabilizer level of 30-40 ppm to reduce the degradative effects of sunlight upon the chlorine residual.
  3. Adjust chlorine residual to 1-4 ppm. When using other products as outlined in directions for this product, always follow directions on those products.
  4. For treatment of a freshly cleaned and filled pool, with circulation pump operating pour the initial dose of 6-11 fluid ounces of this product per 10,000 gallons of water directly into pool.
  5. Additions of 2-4 fluid ounces of this product per 10,000 gallons of water should be made every 5-7 days after initial treatment for maintenance.
  6. Pools containing heavy growth of algae should be brushed and vacuumed (to waste if applicable) prior to using this product.
  7. For pools having light algae growth, brush pool walls and floor, and with circulation pump operating pour 11-17 fluid ounces of this product per 10,000 gallons of water directly into pool. Remove settled algae debris by vacuuming (to waste if applicable).
  8. To restore filter performance, chemically clean filter following manufacturer’s directions using an appropriate filter cleaner.
  9. Wait at least 15 minutes after application before entering pool