Non-Chlorine Shock-Oxidizer

Product Information

  • 42.8% Potassium peroxymonosulfate
  • 4.3% active oxygen
  • Oxidizes nitrogenous waste that accumulate in swimming pool water
  • Does not raise chlorine residual

APPLICATION INSTRUCTIONS:

  1. Use this product at the rate of two pounds (2 lb) per 10,000 gallons of pool water.
  2. Regular treatment: Use at the rate of one pound (1 lb) per 10,000 gallons every week.
  3. When the water temperature is above 86˚F (30˚C) or when the pool is subjected to heavy use, the treatment
    (1 lb per 10,000 gallons) should be made twice weekly.
  4. Broadcast the required amount of this product directly into the deep end of the pool with the filtration system running.
  5. Apply in the morning or evening when no bathers are in the water. Swimming or bathing may be resumed in 15 minutes.